强冲击加载条件下的钨合金的界面研究

借助定量金相、扫描电子显微镜、透射电子显微镜等微观分析手段对钨质量分数为９３％的钨合金在１５～５０ＧＰａ冲击压力下微观结构响应性态进行了考察，发现了一些钨合金所特有的现象，即钨颗粒与粘结相交界处出现成分迁移，新相析出；并结合断口分析，探讨了钨合金在冲击作用下发生断裂的微观特征与韧脆转化间的关系及其物理本质。     

Design and Theoretical Study of Nickel Catalysts for Syndiotactic Polyolefins

A nickel catalyst was nodeled with ligand L^2,[NH=CH-CH=CH-0]^-,which should have potential use as a syndiotactic plyolefin catalyst,and the reaction mechanism was studied by theoretical calculations using the density functinal method at the B3LYP/LANL2MB level.The mechanism involves the formation of the intermediate [NiL^2Me]^ ,in which the metal occupies a T-shaped geometry.This intermediate has two possible structures with the methyl group trans either to the oxygen or to the nitrogen atom of L^2.The results show that both structures can lead to the desired product via similar reaction paths,A and B.Thus,the polymerization could be considered as taking place either with the alkyl group occupying the position trans to the Ni-0 or trans to the Ni-N bond in the catalyst.The polymerization process thus favors the catalysis of syndiotactic polyolefins.The syndiotactic synthesis effects could also be enhanced by varations in the ligand substituents.From energy considerations,we can conclude that it is more favorable for the methyl ttrans-O position to form a complex than to occupy the trans-N position.From bond length considerations,it is also more favoured for ethene to occupy the trans-O position than to occupy the trans-N position.     

Two—dimensional Network Crown Ether Complex.Synthesis and Crystal Structure of 18—Crown—6 Complex：[K（18—C—6）]2[Cd—（nmt）2]

The novel complex [K(18-C-6)]2[Cd(mnt)2][18-C-6-18-crown-6,nmt=1,2-dicyanoethene-1,2-dithiolate,C2S2-(CN)2^2-] was synthesized and characterized by elemental analysis,IR spectrum and X-ray diffraction analysis.The complex displays two-dimensional network structure of [K(18-C-6)] complex segments and [Cd(nmt)2] complex segment bridged by S-K-S,S-K-N and N-K-N interactions between adjacent[K(18-C-6)] and [Cd(mnt)2]units.     

Renewable amperometric immunosensor for complement 3 assay based on the sol-gel technique

A renewable amperometric immunosensor based on the sol-gel technique has been constructed by dispersing graphite, complement 3 (C3) antiserum, and sol-gel at low temperature. The prepared immunosensor is rigid, porous, and has a renewable external surface. A competitive binding assay has been used to determine C3 in human serum with the aid of C3 labeled with horseradish peroxidase. The enzyme-labeled antigen can readily diffuse toward the encapsulated antibody, which retains its binding properties. The experimental conditions for the assay with the biocomposite, including the loading of C3 antiserum in the biocomposite, the amount of labeled C3 in incubation solution, incubation time, and temperature, have been optimized. Using C3 labeled with horseradish peroxidase, and o-AP as the substrate, amperometric detection at -150 mV (relative to the SCE) results in a linear detection range of 1.17-35.1 microg mL(-1), with a detection limit of 0.56 microg mL(-1). Serum samples have been assayed and the results demonstrate the feasibility of the proposed immunosensor for clinical analysis. The surface of the immunosensor can be renewed simply by polishing to obtain a fresh immunocomposite ready to use in a new competitive assay.     

一种新的环糊精衍生物手性固定相的合成及其在对映异构体过量值测定中的应用

 以 β 环糊精为原料 ,合成了一种新的环糊精衍生物 2 ,6 二 O 苄基 3 O 戊酰基 β 环糊精 ,用核磁氢谱和红外光谱对产物进行了表征 ,并将所得环糊精衍生物用作毛细管气相手性固定相制备成柱 ,用于 2 ,4 二氯苯乙酮的不对称催化氢化产物 2 ,4 二氯苯乙醇和反式 2 己烯醇的Sharpless环氧化产物 反式 3 正丙基环氧乙烷甲醇的对映异构体过量值 (e.e .值 )测定和催化反应评价 ,取得了很好的结果。     

新型高吸水聚合物凝胶型屏蔽暂堵剂MTC-1的合成及性能

以丙烯酸（AA）、丙烯酰胺（AM）、2-丙烯酰胺基-2-甲基丙磺酸（AMPS）为原料，蒙脱土（MMT）为改性剂，过硫酸钾和无水亚硫酸氢钠为氧化还原引发体系，六亚甲基四胺（C₆H₁₂N₄）为交联剂，采用水溶液聚合法合成了一种新型高吸水聚合物凝胶型屏蔽暂堵剂（MTC 1），其结构经IR表征。在最优合成条件（AM/AMPS/AA=11/7/1, m/m/m，引发剂加量0.6 wt%，于45 ℃反应2.5 h）下，MTC-1的最大吸水倍率为1006倍。岩心流动实验结果表明：MTC-1的堵水性能较高，封堵效率达到83.72%。     

实验室废液的回收及效果评价——以“铬废液回收及评价”为例

This paper introduces an experiment about waste liquid recovery and effect evaluation in laboratory. Through this experiment, the basic operations of crystal preparation, chemical analysis and instrumental analysis are further consolidated. At the same time, it allows students to experience a series of possible problems of condition selection and control in the process of waste liquid treatment. We hope to improve the students' ability to analyze and solve problems, enhance their interest in learning, and strengthen their humanistic education.     

液相色谱手性拆分机理的热力学方法研究

手性识别是分子识别的一个重要组成部分。液相色谱手性拆分机理研究有助于色谱条件的优化和新型手性固定相的设计，也有助于理解手性识别机制。本文就线性色谱与非线性色谱条件下手性拆分过程对应热力学参数的推求方法进行了评述，阐述了相关热力学参数的涵义及其在色谱保留及手性拆分机理探讨中的应用，并展望了该领域的研究前景。     

Effect of iron-containing catalysts on thermal decomposition of cured GAP-AP propellants

The effects of various burning rate catalysts on thermal decomposition of cured glycidyl azide polymer (GAP)-ammonium perchlorate (AP) propellants have been studied by means of thermal analysis and a modified vacuum stability test (MVST). Four types of iron-containing catalysts examined in this paper are catocene, ferrocenecarboxaldehyde (FCA), ferrocene, and ferric oxide. Results of differential thermal analysis (DTA) and thermogravimetric analysis (TG) revealed that the catalysts play an important role in the decomposition of both AP and GAP. The peak decomposition temperature (T _m) of DTA curves and onset decomposition temperature (T _o) of TG patterns considerably shifted to a lower temperature as the concentration of catalysts increased in the propellants. The endothermic temperature of AP, however, is unaffected by the presence of burning rate catalysts in all cases. The activation energy of decomposition of the propellants in range of 80 to 120°C is determined, based on the MVST results.     

四氟乙烯-全氟4-甲基-3,6-二氧杂△~7辛基磺酰氟共聚物的分子运动

本工作用振簧仪,在-150—80℃范围内,测试了四氟乙烯-全氟4-甲基-3,6-二氧杂△~7辛基磺酰氟共聚物的动态力学性能。样品是含有不同侧基数目的部分结晶共聚物。观察到四个松弛过程,按温度下降次序记为α、γ_1-、γ_2-、γ_3-。α峰(室温附近)系玻璃化转变。γ_1峰(-50℃,～215Hz)为主链有阻碍的短链段分子运动。γ_2-峰(-60℃,～230Hz)为侧基的分子运动。γ_3-峰(-77℃,～260Hz)为的链段运动,并且γ_3-峰的强度随结晶度增加而增强。